hivi音响怎么连接

Low Frequency Audio System Equipment Connectivity Sequence:

1. Control Room (1-2 Channels) - Equalizer - Filter - Limited Amplifier - Low Frequency Power Amplifier - Subwoofer.
2. Auxiliary Audio System Equipment Connectivity Sequence: Control Room (3-4 Channels) - Equalizer - Delay (Optional) - Limiter - Auxiliary Speaker Power Amplifier - Auxiliary Speaker.
3. Main Audio System Equipment Connectivity Sequence: Main Channel (L-R) - Equalizer - Impulse Generator (Optional) - Feedback Suppression (Optional) - Limited Amplifier - Main Amplifier Power Amplifier - Main Amplifier.
4. Monitoring Audio System Equipment Connectivity Sequence: Control Room (Auxiliary Channel) - Equalizer - Limiting Amplifier - Monitor Amplifier Power Amplifier - Monitor Amplifier.

Here is the corrected and modified version of the content:

1. Hifi Audio System Connectivity Order: Low Frequency Audio System Equipment Connectivity Sequence:

   Control Room (1-2 Channel): Use the first two channels for low-frequency control, where you can independently adjust the volume of the low bass audio by turning on the power supply (audio jack indicator lights will light up to indicate that Bluetooth is turned on). After the Bluetooth icon on your Android phone is illuminated, tap "Discover" to start searching for available Bluetooth devices. Find the one you select and hear a beep sound indicating connection success.

2. Auxiliary Audio System Equipment Connectivity Sequence: Control Room (3-4 Channel): Follow the same steps as step 1 for connecting the auxiliary audio system using Bluetooth, with the following modifications:

   • Select "Others" or "Discoverable" mode for the auxiliary audio device when entering search mode.
   • Turn on the appropriate output (e.g., AUX input) in your mobile's settings and enable Bluetooth.
   • When prompted, tap the selected auxiliary audio device to connect.

3. Main Audio System Equipment Connectivity Sequence: Main Channel (L-R): The main channel connects through an equalizer, which enhances the clarity and depth of the music played from this channel. Use the L-R signal path, or the 'Main' channel, as it offers direct access to the amplifier in the main audio system. Follow these steps for the following connectivity sequence:

   1. Use the equalizer in the Control Room to find the desired frequency range for the primary low-frequency playback.
   2. Connect the first pair of subwoofers, either direct or through the same channel as the L-R main channel.
   3. If using direct subwoofers, route them to the control room via a speaker cable, typically ending in a balanced cable between the speaker outputs (main channels).
   4. Alternatively, if using indirect subwoofers, route them to the subwoofer in the main system via a crossover cable. Connect the crossover cable to the input/output pairs of the first pair of subwoofers.

4. Monitoring Audio System Equipment Connectivity Sequence: Control Room (Auxiliary Channel): Following step 2 for the auxiliary audio system connection, add the monitor channel, also known as the 'Monitor' channel. Here's how to proceed:

   • Configure the Aux output (usually found under Output) in your mobile's settings and make sure Bluetooth is enabled.
   • Once connected, use the 'Monitor' channel for monitoring the lower frequencies during the playback process. This channel provides a separate output from the speakers, allowing you to visually see the audio being sent back to the listening device.

By following these configuration steps, you can establish a clear and efficient low-frequency audio system connectivity sequence in your Hindi audio setup. Adjustments may be necessary based on your specific setup and preferences. Enjoy listening to your favorite tunes!